What are the characteristics of the steel tape armoring machine? How to operate?
Release time:
2021-03-30
The tugboat of the steel tape armoring machine adopts a new wear-resistant alloy material, which greatly improves the wear resistance compared with the traditional phenolic laminated tugboat. The traction device adopts natural dividing line, which avoids the abrasion and extrusion damage between the cable and the traction wheel, and can realize single and double steel wire armor. The diameter of the armored cable is 120, the diameter of a single steel wire is 0, the scope of application is wider, the main winch speed is high, the appearance speed is fast, and the production efficiency is high. The steel wire armoring machine is mainly used for steel wire armoring of various cables and optical cables.
steel belt armored machineThe tugboat adopts new wear-resistant alloy material, which greatly improves the wear resistance compared with the traditional phenolic laminated tugboat. The traction device adopts natural dividing line, which avoids the abrasion and extrusion damage between the cable and the traction wheel, and can realize single and double steel wire armor. The diameter of the armored cable is 120, the diameter of a single steel wire is 0, the scope of application is wider, the main winch speed is high, the appearance speed is fast, and the production efficiency is high. The steel wire armored machine is mainly used for steel wire armored of various cables and optical cables.
steel belt armored machineThe main features:
1. It can realize the armor of single layer and double layer steel wire.
2. Non-metal and metal packaging heads can be added according to user requirements.
3. The main shaft adopts large diameter and thick wall, and the winch is supported by multi-section tugboat, which increases the rigidity and stability of the equipment.
4. The steel wire armored machine adopts external wiring to avoid wiring trouble when the internal shaft is broken.
5. Steel wire stress relief device. The equipment consists of a central pay-off, an armored host, a parallel die base, a winding device, a traction device, a meter counting device, a take-up and pay-off device, a transmission system and an electrical system.
So how to operatesteel belt armored machineWhat?
1. Before starting the cable armoring machine, install the required steel or copper tape and lock the nut.
2. When starting, loosen the adjusting handle of the stepless speed change (if the speed regulating motor is not easy to start in the adjusted position, pay special attention to this operation method), use the speed regulating motor to rotate slowly, and then adjust the stepless speed change The knob makes it suitable for armored cables.
3. Adjustment of steel belt or copper belt: At the beginning of startup, adjust the fixed guide wheel on the guide rod according to the bandwidth and the speed of the cladding, and adjust the angle according to the actual speed, bandwidth and wire diameter before and after the slit.
4.steel belt armored machineThe dual functions of speed regulating motor and continuously variable transmission are adopted to adjust the gap when the bandwidth armor is wound.
Recommend News
HEXING CABLE MACHINERY
TEL: +86-317-3601666, +86-317-3236119
FAX: +86-317-3618408
E-MAIL: china@hbhxdg.cn
E-MAIL: hbhxdg@gmail.com
WEB: http://www.hbhxdg.cn
ADD: Baoantun Industrial Zone, Hejian City, Hebei Province