Precautions for Operation of Steel Belt Armoring Machine
Release time:
2021-03-18
Steel belt armored machine is a necessary equipment for power cables, plastic cables and control cables in wire and cable factories. The armoring materials are copper tape, steel tape and aluminum tape. Precautions for the operation of the steel tape armoring machine: 1. Before starting the equipment, carefully check whether the protective cover and groove cover of the equipment are firm. At the same time, carefully check whether the fasteners running at high speed, such as ladles, are fastened. Only after the safety is confirmed, the machine can be started.
steel belt armored machineIt is a necessary equipment for power cables, plastic cables and control cables in wire and cable factories. The armoring materials are copper tape, steel tape and aluminum tape. Precautions for operation of steel tape armoring machine:
1. Before starting the equipment, carefully check whether the protective cover and groove cover of the equipment are firm. At the same time, carefully check whether the fasteners running at high speed, such as ladles, are fastened. Only after the safety is confirmed, the machine can be started.
2. When working, the staff should wear protective equipment, and the cuffs and skirts should be fastened and not fluttered.
3. The fixing screws of the steel belt plate are complete and easy to use. Do not drive until the screws are tightened and firmly fixed.
4. Wear glasses when welding steel strips with seam welding machine, and it is not allowed to use copper wire instead of welding machine.
5. When the steel wire armored machine is running, it is strictly prohibited to lubricate, repair and clean the equipment, and it is not allowed to clean the working area.
6. After the armor is completed, it is not allowed to use the method of sawing off a part of the cable, leaving a part, and then breaking the cable with the take-up tension to avoid accidents.
7. It is strictly forbidden to put articles on the passage, and the materials used in production should be stacked neatly.
8. Before starting the steel wire armoring machine, check whether the steel wire rope of the electric hoist is in good condition. It is forbidden to hang and hang the steel belt plate during driving.
9. After the electrical appliance fails, it should be repaired by an electrician in time, and it is not allowed to repair it by itself.
10. When stopping work, the asphalt tank motor should be turned off. When cleaning the machine, turn off the heating power and rotating power. When leaving the machine, turn off the rotary power control switch.
11. When it is necessary to ignite and clean the pot, special personnel should be assigned to watch the fire to prevent fire.
12. When the thermal instrument of the asphalt tank is out of control, it should be repaired by the instrument engineer immediately to avoid the fire caused by the high temperature of the asphalt.
13. It is strictly prohibited to light and cook on the plate of the asphalt heating electric furnace.steel belt armored machineSmoking is prohibited in the work area, and lint falling on the equipment should be cleaned frequently.
14.steel belt armored machineSpecial fire extinguishing equipment shall be provided around, and regular quality inspection and fire extinguisher use training shall be conducted.
Recommend News
HEXING CABLE MACHINERY
TEL: +86-317-3601666, +86-317-3236119
FAX: +86-317-3618408
E-MAIL: china@hbhxdg.cn
E-MAIL: hbhxdg@gmail.com
WEB: http://www.hbhxdg.cn
ADD: Baoantun Industrial Zone, Hejian City, Hebei Province